Cremation Furnaces

Product Details:

We offer Electrical Cremation Furnace.

Specifications:

Control Panel: Digital and inbuilt with machine

Air Requirement: Outside on machine air inlet lowers located below base capable of passing 1500 cfm of free air

Chimney: 100 ft. height with 300 mm diameter at top of MS pipes heavy quality ISI marked with ventury effect nozzle and supporting GI wire guys

Refractory: High quality branded ISI marked which can with stand temperatures upto 1600 deg C and sillimanite material element holding bricks

Stainless Steel Front: gives good looks, is easy to clean while providing a professional finish to your equipment. This is an important feature when considering

Remains Removal Systems: a separate remains removal door is located at the rear of the unit is included to enable the operator to pull and collect the remains to the rear of the chamber. This reduces heat loss and thermal shock, as not needs to open the main door

Installation: installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning

Product Details:

A cremation furnace is also called a: “incinerator“, “cremator” and “cremation oven”. A human cremation furnace is used in a crematorium. The cremation or incineration of a dead body is carried out in a cremation furnace at a temperature ranging between 1000 to 1300 degrees Celsius. The intense heat helps reduce the body to its basic elements and dried bone fragments. The cremation process takes place in a cremation chamber, also known as a retort, of a crematory. The chamber is preheated at a set point 800 degrees Celsius and then the coffin with body is placed into the main cremation camber from the cremation furnace. This happens quickly through a mechanized charging bier to avoid heat loss. The cremation furnaces of Europe are very innovative and are high-tech cremation solutions. The cremation furnaces Europe are the best a crematorium can buy, due to it’s energy efficiency and it’s cremation filtration system.

We have emerged as one of the leading manufacturers of LPG Gas Cremation Furnace.

Product Details:

We are offering Solar Electric Cremation Furnace.

Specifications:

• Control Panel: Digital and inbuilt with machine
• Burners Output: Maximum input rating 1400000 Btu''s per Hour
• After Burner: Maximum 700000 btu''s per hour
• Air Required: Outside on machine air inlet lowers located at or below burner height capable of passing 2500 cfm of free air
• Chimney: 100 Ft. height with 250 mm diameter at top of MS pipes heavy quality 1st marked with ventury effect nozzle and supporting GI wire guys
• Refractory: High quality (branded IS) marked which can with stand temperatures upto 1600°C
• Stainless Steel Front: Gives good looks, is easy to clean while providing a professional finish to you equipment. This is an important feature when considering.
• Remains Removal Systems: A separate remains removal door is located at the front (optional backside also) of the unit below main charging door, is in cluided to enable the operator to pull the remains to the front of the chambers
• Installation: Installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning.

Product Details:

We are offering an extensive array of Electric/ LPG Cremation Furnace to meet the requirements of customers.

Specifications:

• Control Panel: Digital and inbuilt with machine
• Burners Output: Maximum input rating 1400000 Btu's per Hour
• After Burner: Maximum 700000 btu's per hour
• Air Required: Outside on machine air inlet lowers located at or below burner height capable of passing 2500 cfm of free air
• Chimney: 100 Ft. height with300 mm diameter at top of MS pipes heavy quality 1st marked with ventury effect nozzle and supporting GI wire guys
• Refractory: High quality (branded IS) marked which can with stand temperatures upto 1600°C
• Stainless Steel Front: Gives good looks, is easy to clean while providing a professional finish to you equipment. This is an important feature when considering.
• Remains Removal Systems: A separate remains removal door is located at the front (optional backside also) of the unit below main charging door, is in cluided to enable the operator to pull the remains to the front of the chambers
• Installation: Installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning.

Product Details:

We have emerged as one of the leading manufacturers of 3 Phase Cremation Furnace.

Product Details:

We have emerged as one of the leading manufacturers of Bio Gas Cremation Furnace.

Product Details:

We have emerged as one of the leading manufacturers of Electric Cremation Furnace.

Product Details:

The  Gas Human And Animal Dead Body Incinerator  is  built  with  double chamber  cremation  furnace  with a  strong  cremation bed  and  secondary  air  holes. Primary Chamber : Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement, hot hearth design. One hot hearth combustion burner, temperature controlled on-off, complete with internal air fans. One waste ignition burner, temperature controlled on-off, complete with internal air fans. One temperature control sensor Secondary Chamber : Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation. One secondary chamber burnout burner, temperature controlled on-off, complete with internal air fans. 76mm refractory lined stack that reduces heat penetration under every condition, preventing the possibility of fire.

We are offering an extensive array of Diesel Cremation Furnace to meet the requirements of customers.

Specifications:

• Control Panel: Digital and inbuilt with machine
• Burners Output: Maximum input rating 1400000 Btu''s per Hour
• After Burner: Maximum 700000 btu''s per hour
• Air Required: Outside on machine air inlet lowers located at or below burner height capable of passing 2500 cfm of free air
• Chimney: 100 Ft. height with 250 mm diameter at top of MS pipes heavy quality 1st marked with ventury effect nozzle and supporting GI wire guys
• Refractory: High quality (branded IS) marked which can with stand temperatures upto 1600°C
• Stainless Steel Front: Gives good looks, is easy to clean while providing a professional finish to you equipment. This is an important feature when considering.
• Remains Removal Systems: A separate remains removal door is located at the front (optional backside also) of the unit below main charging door, is in cluided to enable the operator to pull the remains to the front of the chambers
• Installation: Installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning.

Product Details:

We have emerged as one of the leading manufacturers of CNG Cremation Furnace.

Product Details:

We are offering Cremation Furnace.
Specifications:
 
Control Panel: Digital and inbuilt with machine
Burners Output: Maximum input rating 1400000 Btu''s per Hour
After Burner: Maximum 700000 btu''s per hour
Air Required: Outside on machine air inlet lowers located at or below burner height capable of passing 2500 cfm of free air
Chimney: 100 Ft. height with 350 mm diameter at top of MS pipes heavy quality 1st marked with ventury effect nozzle and supporting GI wire guys
Refractory: High quality (branded IS) marked which can with stand temperatures upto 1600°C
Stainless Steel Front: Gives good looks, is easy to clean while providing a professional finish to you equipment. This is an important feature when considering.
Remains Removal Systems: A separate remains removal door is located at the front (optional backside also) of the unit below main charging door, is in cluided to enable the operator to pull the remains to the front of the chambers
Installation: Installation is made easy as our units are wired and fabricated in 5 - 6 pieces with proper dimensions and are easy to assemble at site and our technical team supervise the work at site during installation and commissioning.